2017年4月21日星期五

Safe use of forklift belts

1. Can not change the seat belt work structure and principles, to make it more secure and more effective protection of the driver.
2. The electric stacker has to replace the new harness after encountering a serious collision, rollover, etc.
3. New forklift belts must be replaced due to the normal chemical effects of the outside world, such as sun and rain, when the forklift seat belt is damaged, cracked, aged or softened.
4. The safety belt of the forklift must be replaced when the metal connecting parts are deformed, bent, broken, rusted or aged.
5. The performance of the Hand Pallet Trucks with scale seat belts in the use of poor, can not automatically retract, can not be an emergency self-locking, buckle when not close these forklift belts must be replaced to protect the normal safety role.
6. If the use of the installation of forklifts when the seat belt, the thickness should not be less than 1.5 mm, the width should not be less than 50 mm, the best request for replacement with an emergency self-locking function of the seat belt.

2017年4月16日星期日

The main reason for the corrosion of the forklift

Electric hydraulic stacker are an indispensable tool for the production of labor in most factories, and of course the tools are depleted. Which corrosion is the culprit of the consumption of forklifts, and now to analyze the main cause of corrosion rust in the end what
Electric Riding Pallet Jack corrosion is not only related to the environment and its own structure.
Forklifts can be divided into internal combustion forklifts and electric forklifts. Most of the internal combustion forklift used in ports, docks and mining sites, the use of the environment is relatively poor, especially in the port and chemical industry, by subtropical, humid tropics, marine climate and industrial waste gas, dust combined effect, causing damage to forklift parts corrosion , Corrosion is more serious; and battery forklifts are mostly used in warehouses and other indoor places, environmental changes, environmental factors caused by relatively small corrosion.
The corrosive environment generated inside the truck is such that the high temperature generated by the engine and the combustion exhaust gas generated by the engine, the acid mist caused by the battery, the leakage, the vibration during operation, the stress caused by the impact, the friction, the local damage caused by the collision, The main reason for corrosion damage of forklift parts.
The main mechanism of metal corrosion is the conversion of the original metal into metal oxides, resulting in structural parts or components rust, damage can not even repair and scrapped. And the aging of non-metallic materials such as paint, rubber, glass fiber and steel fiber, mainly due to the comprehensive effect of the environment, the material macromolecular structure cracking, degradation, dissolution and other physical and chemical changes, resulting in decreased appearance and performance. It can be seen that the design structure, application materials, process and protective measures of the forklift itself directly determine the corrosion resistance of the forklift.

2017年4月11日星期二

Knowledge of safe operation of forklift

In order to effectively prevent, timely control and elimination of sudden special equipment accident hazards, the maximum is to reduce special equipment accidents. To ensure that the forklift driver safe, accurate, standardized and effective operation of the semi electric order picker.
First, forklift common violations
Second, the safe operation of forklift procedures
Third, the forklift operation "eight are not allowed"
Driving forklifts must be trained and held with special equipment operating personnel permit to drive the Electric fork over stacker

2017年4月6日星期四

Do not operate the hydraulic system before the hydraulic system oil gets hot.

therwise, it will damage the hydraulic components. electric rider pallet truck in the driving to control the speed, keep the car away from, to avoid emergency braking, cold season braking interval than usual to extend about 2 times. It is forbidden to steer and reduce the impact force during cornering to prevent breakage of the rigid structural parts.
To do the equipment season maintenance work, the detection of antifreeze freezing point, making it lower than the local minimum temperature 5 ℃; so that the temperature of the thermostat open at about 82 ℃; the battery electrolyte density raised to 1.280g / cm3; timely adjustment of the machine The Ministry of oil, the work of the field equipment to install insulation measures, if necessary, install the engine oil preheating device, and start the engine regularly, preheat the various parts of the working system.
Normal start-up of the engine should have sufficient warm-up time to operate at low speed light load until the oil in the engine, transmission, hydraulic system and final drive heats up. Equipment at work, the operation of the bucket, blade and a variety of devices to be slow, to prohibit the impact of large throttle, scraping, shovel and push, the focus on "stable" and "slow". Winter is the season of high accidents, accounting for about 80% of the total annual accidents, and winter accidents due to operational accidents caused by more than 65%. If the temperature below -15 ℃, the engine can not start immediately after the start of the work, but should make the engine to 1000-1100r / min running 10-15min, and the transmission in neutral. So to regularly check the forklift machine rigid connection and the main load-bearing parts.

2017年4月1日星期六

What is the main force in the future forklift market?

Forklift nearly two years of sales, the growth rate of more than 15%, Hangzhou crane truck forklift rental also introduced new forklift. In the sales, the internal combustion engine occupies an absolute proportion, but the internal combustion engine is not the main force of the future forklift industry, but the battery forklift.
With the domestic forklift industry market, a substantial increase in the industry's demand for weight in the past two years also continued to grow, the main driving force is still internal combustion Electric Fork Over Stackers. Internal combustion forklift dynamic performance, speed, fork lift speed, traction and other indicators are higher than the battery forklift. And for Hangzhou forklift rental and other host companies, the cost of control is to continue to use one of the main reasons for internal combustion forklift. The domestic product structure is still stuck in the internal combustion Electric counterbalance stacker for the mainstream product stage, so the internal combustion forklift industry want to do a large-scale adjustment is not a matter of time.
Today, in the context of low-carbon environmental protection, the forklift industry's power source to the power-driven upgrade is a must. Chinese companies must take the strategy of overseas markets, the use of battery forklift, will be positioned in the service exports, appropriate to cultivate the domestic market share. Can be expected, the future forklift market, the main force must be a battery forklift. But from the market point of view, only the fuel cost pressures and emissions regulations of the double constraints of a profound impact on the forklift business, will promote the real change of the advent of. Prior to this, the internal combustion forklift will continue to occupy the mainstream market position.

2017年3月27日星期一

Industrial transport vehicles are widely used in ports, stations, airports, freight yard, factory workshops, warehouses, distribution centers and distribution centers, etc., and can enter the cabin, cars and containers for pallet cargo handling, handling operations, tray transport, container transport Indispensable equipment.
Forklift in the enterprise's logistics system plays a very important role, is the main force in the material handling equipment. Widely used in stations, ports, airports, factories, warehouses and other departments in the national economy, is mechanized loading and unloading, stacking and short-distance transport of efficient equipment. electric walkie pallet jack appeared in 1917. During the Second World War, the forklift was developed. China began manufacturing forklifts from the early 1950s. Especially with the rapid development of China's economy, most of the enterprise material handling has been divorced from the original manual handling, replaced by forklift-based mechanized handling. Therefore, in the past few years, China's forklift market demand every year to double-digit growth rate.

2017年3月20日星期一

electric rider pallet truck because of its operational control is simple and flexible, the operator's operating intensity is much lighter than the internal combustion forklift, the electric steering system, acceleration control system, hydraulic control system and brake system are controlled by the electrical signal, greatly reduced The labor intensity of the operator, so as to improve the efficiency of their work and the accuracy of the work is very helpful. And compared to internal combustion forklifts, electric vehicles, low noise, no exhaust emissions advantages have also been recognized by many users.
In addition, the choice of High Lifting stacker there are some technical reasons. The rapid development of electronic control technology makes electric forklift operation more and more comfortable, the wider the scope of application, to solve the logistics program more and more. These aspects, the electric forklift market demand will certainly grow faster and faster, electric forklift market share will be more and more.